Custom-made boat cover sailboat

1.

Exterior photos of a custom Norena cover




2.

Interior photos of a custom Norena cover

 



Internal elastic tensioning every 50cm with 10mm elastic.



Skjøting av strikk ved glidelås deling
Elastic connection at zipper split.



Vant innvendig
Split at mast.
 



Elastic connection at mast.




Rear entrance with zipper and ventilation under the ridge. 


3.

Process overview

Welcome to us! At Norena, we specialize in creating custom boat covers for your sailboat. Our covers are not off-the-shelf products – each one is carefully measured and handcrafted to ensure optimal protection and a perfect fit for your boat. In this post, we will guide you through the process, from initial contact to the finished product, so you know exactly what to expect when ordering a custom boat cover from us.

  1. Offer
    Here we go through everything that might incur extra costs and what can be removed if desired.

  2. Measurement Week
    After the offer is approved by the customer, we ask the customer to choose a measurement week. On the Sunday before the agreed measurement week, we will call you and set an exact day and time.

  3. Measurement
    We arrive with the frame, assemble and adjust it. Then we measure the boat with the customer. This takes an average of 1-1.5 hours.

  4. Production Week
    After the measurement is done, the cover will be produced within one week.

  5. Installation Week
    Once the cover is produced, we will return to the boat and install the cover with the customer for training and a final check of the measurements. This will happen within one week.

    To summarize:
    - After offer confirmation, we will measure the boat during the measurement week.
    - After measurement, there is 1 week for production.
    - After production, we will return the following week and install the cover.

    Why choose a custom boat cover?

A sailboat is an investment, and a good cover is essential to protect it from weather and wind, whether it is on land or in the water. Our customized solutions are designed to meet your specific needs, with a focus on quality, durability, and a perfect fit.

 

4.

Standard and extra equipment

 

Standard:

  1. Mast opening.
  2. Rear entrance
  3. 1 pc split for forestay.
  4. 1-2 pcs shrouds at mast, if these are in line (aft-swept spreaders).
  5. Backstay, single or double.

Extra:

  1. Extra baby stay/forestay - 1250kr
  2. Mast no. 2 - 5000kr
  3. Lower shrouds to mast (straight spreaders) - 1250kr per pc.
  4. Radar, wind vane or mast. 1 pc penetration - 1500kr. 3 pcs penetrations - 3000kr.
  5. Davits without collar - 1250kr. With collar - 1500kr.
  6. Anchor opening with flap - 1500kr
  7. Mooring opening with flap - 1500kr
  8. Window 100x130cm 1500kr
    Window 200x130cm 2000kr

 

Step 5.


Order Information


Boat type:
type, feet, year.


Products included as standard but can be changed upon request:

  • Number of sections. 3 sections recommended for 30 feet and above

  • Packing marks.
    Packing marks indicate 3 things:
    1. Which side is starboard and port, for easy installation.
    2. Where the part belongs on the boat, 1. in front of the mast, 2. behind the mast, etc.
    3. The canvas is packed accordion-style like a sail within the packing mark area. 40cm.


  • Attachment points for the skirt.
  • Packing bags for the frame.


 

 

Back to Tailor-made boat cover for your sailboat