STEP. 3

Process review

Welcome! At Norena, we specialize in creating custom boat covers tailored to fit your sailboat. Our covers are not off-the-shelf items – each one is meticulously measured and handcrafted to ensure optimal protection and a perfect fit for your boat. In this post, we will guide you through the process, from initial contact to finished product, so you know exactly what to expect when you order a custom boat cover from us.

1. Quote
   Here, we review everything that might incur extra costs and what can be removed upon request.
   
   
2. Measuring Week
   After the quote is approved, we ask the customer to choose a measuring week. On the Sunday before the agreed measuring week, we will call the customer to set the day and time for the measurement.
   
   
3. Measurement
   We arrive with the frame, assemble and adjust it. Then, we measure the boat with the customer. This takes approximately 1-2 hours.
   
   
4. Production Week
   After the measurement, the cover is produced within one week.
   
   
5. Installation Week
   Once the cover is produced, we will return to the boat and install the cover with the customer for training and a final check of the measurements. This will happen within one week.
   
   To summarize:
   - After confirming the quote, we will measure the boat during the measuring week.
   - After measurement, there is 1 week for production
   - After production, we will return the following week and install the cover.
   

Why choose a custom boat cover?

A sailboat is an investment, and a good cover is crucial to protect it from the elements, whether it's on land or in the water. Our custom solutions are designed to meet your specific needs, with a focus on quality, durability, and a perfect fit.

STEP. 4

Standard and optional equipment

Standard:

1. Outlet to mast.
2. Rear entrance
3. Split to forestay 1 pc. 
4. 1-2 pcs shrouds by mast, if these are in line (aft-swept spreaders).
5. Backstay, single or double.

Extra:

1. Extra babystay/forestay
   Without collar - NOK 1250.
   With collar - NOK 1500
2. Mast no. 2 - NOK 5000
3. Lower shrouds to mast (straight spreaders)
   Without collar - NOK 1250 per pc.
   With collar - NOK 1500 per pc.
4. Radar, windvane or mast.
   1 lead-through - NOK 1500.
   3 lead-throughs - NOK 3000.
5. Davits
   Without collar - NOK 1250.
   With collar - NOK 1500. 
6. Anchor outlet
   Without flap - NOK 1250.
   With flap - NOK 1500.
7. Mooring outlet
   Without flap - NOK 1250.
   With flap - NOK 1500.
8. Window
   100x130cm NOK 1500 
   200x130cm NOK 2000

Standard Products You Can Customize